Flojet 18550000A 13 GPM RV Macerator Pump

Flojet 18550000A 13 GPM RV Macerator Pump

Manufacturer: Flojet
Item #: 18550000A
Availability: In-Stock
Condition: New
Units:1
List Price:$ 139.73
(0% Off)

$ 139.73 Buy on Amazon

RV Macerator Pump from FlojetDesigned to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water...

Overview

RV Macerator Pump from FlojetDesigned to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high quality Jabsco design found in boat stores worldwide. Put an end to handling and rinsing a dirty 3 sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump up hill, and around corners. The RV waste pump will simplify and improve your RV experienceFeatures:Neat and clean way to quickly evacuate waste tanksEmpty black-water and greywater Holding Tanks at homeGrinds waste as it pumpsBuilt-in Impeller Protection Device...longer lifeFlow of up to 13 GPM for fast, clean Holding Tank evacuationEasy to InstallBecause it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3 ID slip-on hose and the discharge port will accept a 1 ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.ApplicationsEmpty holding tanks and avoid dump stationsTransfer waste from recirculating toilets to main holding tankImpeller Release FeatureAfter long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.br/